Rekluse Z Start Pro Adjustment
Rekluse Z Start Pro Adjustment. Exp engagement adjustment change the exp setting to a higher engagement setting worn or glazed friction disks replace friction disks (rekluse or oem disks recommended) low rpm. If the wire gauges slide in smoothly, the clutch pack needs adjustment.
Swap the thick rekluse adjustment drive plate for the top drive plate. ’03 only, if you have.070” friction plates, we recommend upgrading to ktm oem.078” friction plates. Visit our website for more info at www.rekluse.com.
If The Wire Gauges Slide In Smoothly, The Clutch Pack Needs Adjustment.
Exp engagement adjustment change the exp setting to a higher engagement setting worn or glazed friction disks replace friction disks (rekluse or oem disks recommended) low rpm. With supplied wire guages check friction plate clearance. You can also call our tech service line/custom.
Next, In First Gear, Slowly Accelerate To 6000 Rpm And Slowly Come To A.
’03 only, if you have.070” friction plates, we recommend upgrading to ktm oem.078” friction plates. The clutch does not disengage at idle and will stall the bike going from neutral to first unless you get on the gas. At rekluse we build innovative, high performance clutches for dirt bikes, adventure bikes, harley davidson motorcycles, and atvs.
Swap The Thick Rekluse Adjustment Drive Plate For The Top Drive Plate.
Place recluse top plate over pressure plate and with holes aligned screw to clutch assembly with torx screws and loctite provided. If the wire gauges slide in smoothly, the clutch pack needs adjustment. Visit our website for more info at www.rekluse.com.
I Have A New To Me 06 300 Xcw With The Z Start Pro Clutch.
Place lower assembly into rekluse center clutch hub. Swap the thick rekluse adjustment drive plate for the top drive plate.
Post a Comment for "Rekluse Z Start Pro Adjustment"